Department of Transportation (DOT) Hazmat per 49 CFR
Our DOT Hazmat: Carrier Requirements - Highway training course provides students with training on the Department of Transportation's requirements for the domestic shipment of hazardous materials using private, common, and contract motor carriers on public highways.
Students who should take this course are those involved in the shipment of hazardous materials by public highway. This can include, but is not limited to, workers who package materials for shipment, load and unload hazardous materials for shipment by highway, and drivers of vehicles that transport hazardous materials by highway.
This course is taken entirely online from any computer that has high speed internet and meets our System Requirements. No classroom to attend; no travel required.
There's no need to take the training in a single sitting. Start and stop as often as you want. Our system will track your progress, allowing you to resume your training where you left when you log in.
Have questions about the course? Contact an instructor by email or through our Instructor Hotline. You can expect to receive a response within an hour during business hours and are guaranteed a response within 24 hours.
Take up to six months to complete your DOT Hazmat: Carrier Requirements - Highway training.
Follow along as our narrator talks you through the course.
Telephone support is available 24 hours per day, 7 days per week, including holidays.
The objectives of this DOT Hazmat: Carrier Requirements - Highway course address the requirements for the transportation of hazardous materials by highway found in 49 CFR Part 177 and 177.816 of the Hazardous Materials Regulations (HMR) and Parts 300-399 of the Federal Motor Carrier Safety Regulations (FMCSR).
Upon completion of this course, the student will be able to:
This fully narrated course is built for success, and includes interactions, exercises, and quiz questions intended to help prepare students for the final exam. Students must answer each quiz question and complete each interaction in order to proceed.
This course has a final exam based upon the content covered in the course. The exam consists of 10 questions randomly selected from a larger pool of questions. A score of 70% or better is required to pass the exam. Students who do not pass the exam the first time may retake the exam as many times as necessary in order to pass.
This course consists of 5 sections. Students are required to take each section sequentially as shown below.
|1||Highway Shipping Responsibilities and Training|
|2||General Loading and Unloading Requirements|
|3||Special Loading and Unloading Requirements|
|4||Shipping Papers and Inspections|
This training is brought to you by a team of Certified Outreach Trainers and is based upon Federal Department of Transportation (DOT) regulations found in 49 CFR Part 177 and FMCSR Regulations Parts 300-399.
Download, save, or print a certificate immediately after completing the course.
View Sample Certificate
Per the California Department of Public Health, this course is approved for 2 Contact Hours (0.2 CEUs) of Continuing Education (CE). While these CE units are intended for Registered Environmental Health Specialists (REHS) in California, they are often transferred to other accrediting bodies. Please check with your specific agency for more details and to learn if your agency accepts this course for CE credit (Public Health Accreditation #044).
Initial training is required within 90 days for new employees or employees who assume new hazmat-related responsibilities. Untrained employees may perform hazardous materials employee functions, but only under direct supervision.
The Department of Transportation requires all hazmat employees to be retrained and tested at least once every 3 years. However, the FAA, under 14 CFR, requires retraining for air carrier employees every 2 years.
Both the DOT and FAA require employers to maintain training records.
This DOT Hazmat: Carrier Requirements - Highway course provides training in the shipping requirements for any personnel involved in the transportation of hazardous materials by highway.
Additional training may be warranted depending on the role of the worker and their level of involvement, which may include emergency response training, additional DOT hazardous materials training, or training in the use of personal protective equipment (PPE) used as part of the job.
Additional training in the use of any personal protective equipment (PPE) or clothing used as part of emergency response is also required and should be provided by your employer.
Workers must receive additional training, when required by Federal, State, or local regulations, on the specific hazards of their job. Training providers should be used to ensure credibility and augment a company's training program. Therefore, in addition to the training provided by an outside party, a student should receive site-specific training supplied by his or her employer. This training should target the company's unique approach to hazard prevention, including the use of site-specific equipment, health and safety policies, and emergency procedures. As a rule, this company-specific training should be well documented.
We're Celebrating 20 Years With 20% Off our most popular online training. No coupon code necessary!
If you do not find your question here, we do have more FAQs
Our courses are set up to take a specific amount of time. Some students may get through the training more quickly, while others may take longer to complete their training.
This course will take around 2 hours to complete.
Remember, this training should be used as an intricate tool in the context of an overall training program; it can be combined with other training throughout the year in order to meet any hour requirements needed.
No, our courses are designed so you can start and stop as needed, allowing you to break the training up over a longer period of time. Our system will keep track of your progress, enabling you to resume where you left off upon your next login. It is important that once you start a section, you complete that section or you will need to start that section over from the beginning upon your return.
Yes, you can take the online portion by signing in with your username and password from any location and computer with high-speed internet access. However, each computer does need to meet our basic system requirements for viewing our online courses.
Yes, once you have completed a course, you are able to download, save or print a certificate of completion from your student account. Certificates are created in a pdf format. Users must have the latest version of Adobe Acrobat Reader before attempting to download the completion certificate.
View Sample Certificate
Yes, in addition to the pdf certificate, this course also comes with a PVC wallet ID card with optional photo. ID cards are mailed from our Main Office in Southern California via U.S. Postal Service to anywhere in the United States. Addresses outside the U.S. may incur additional postage fees. Wallet ID cards are created and mailed either the same or next business day, depending on what time the course is completed. Please allow for appropriate mail time, as this may vary by location.
View Sample Wallet ID
A person whose employee(s) perform the following functions:
The term "hazmat employer" also includes any department, agency, or instrumentality of the United States, a State, a political subdivision of a State, or an Indian tribe engaged in offering or transporting hazmat in commerce.
A person who is employed by a hazardous materials employer and directly affects hazardous materials (hazmat) transportation safety.
An owner-operator of a motor vehicle which transports hazmat, and a person (including a self-employed person) who:
Function-specific training is hazardous materials training required as part of your job, but is not covered by any of the other core DOT courses (e.g., General Awareness, Security Awareness, Safety Awareness, etc.). Our current function-specific course options include the following:
* Additional function-specific training may be required to prepare you for the duties associated with your job.
Modal-specific training is hazardous materials transportation training that is specific to the mode of transportation by which a hazmat is conveyed. There are four DOT modal-specific courses, one for each mode of transportation:
In-depth Security training is required when an employer is required by 49 CFR 172.800(b) to have an In-depth Security plan. This training is site specific and covers actions taken by employees according to the employer's plan. In-depth security training is not currently offered.
Drivers of motor vehicles that transport hazardous materials must have training that involves how to safely transport a hazardous material by highway. This may involve a wide variety of driver safety courses. Driver training is not currently offered.