This DOT Hazmat: Function Specific - Labeling course should be taken by any Hazmat Employee involved in the transportation of hazardous materials that may be required to identify, administer, replace, or in any way be involved in the use of hazardous materials labels. This includes, but is not limited to, Hazmat Employers involved in the carrying, shipment, or manufacture of hazardous materials.
This course has been approved for 1 Contact Hour (0.1 CEUs) of REHS Continuing Education Credits (Public Health Accreditation #044).
This course will help you properly identify hazardous materials based on their label, select appropriate labels according to the hazards the material being shipped presents, and complete labels that require entries.
This course expands on the knowledge of shipping papers you received as part of your Basic General Awareness training and is included as part of Advanced General Awareness training.
Per the California Department of Public Health, Safety Unlimited, Inc. is authorized to offer 1 Contact Hour (0.1 CEUs) of Continuing Education (CE) for this program.
While these CE units are intended for Registered Environmental Health Specialists (REHS) in California, they are often transferred to other accrediting bodies. Please check with your specific agency for more details and to learn if your agency accepts this course for CE credit (Public Health Accreditation #044).
Safety Unlimited, Inc. is authorized by IACET to offer 1 Contact Hour (0.1 CEUs) of Continuing Education (CE) for this program.
Safety Unlimited, Inc. (Provider #5660170-2) is accredited by the International Association for Continuing Education and Training (IACET). Safety Unlimited, Inc. complies with the ANSI/IACET Standard, which is recognized internationally as a standard of excellence in instructional practices. As a result of this accreditation, Safety Unlimited, Inc. is accredited to issue the IACET CEU. As an IACET Accredited Provider, Safety Unlimited, Inc. offers CEUs for its programs that qualify under the ANSI/IACET Standard.
There's no need to finish training in a single sitting. Start and stop as often as you want. Our system will track your progress, allowing you to resume where you left off.
This course is taken entirely online from any computer with high speed internet that meets our system Requirements. No classroom to attend; no travel required.
Have questions about the course? Contact an instructor by email or Instructor Hotline. Expect a response within 1 hour during business hours -- guaranteed within 24 hours.
Take up to six months to complete your online training, at your own pace and schedule -- online training is available 24/7.
Telephone support is available 24 hours per day, 7 days per week, including holidays.
Follow along as our professional narrators talk you through the course.
Enroll Multiple Students, take this training in a Group Setting, or learn about Volume Pricing.
Following the completion of all training content and achievement of passing scores on all exams, students will need to complete a brief evaluation and confirm his/her identity. After doing so, the student will have access to the course completion certificate.
This fully narrated course is built for success, and includes interactions, exercises, and quiz questions intended to help prepare students for the module exams. Students must answer each quiz question and complete each interaction in order to proceed.
This course has a final exam based upon the content covered in the course. The exam consists of 10 questions randomly selected from a larger pool of questions. A score of 70% or better is required to pass the exam. Students who do not pass the exam the first time may retake the exam as many times as necessary in order to pass.
The objectives of This DOT Hazmat: Function Specific - Labeling course address the Federal Department of Transportation training requirements for 49 CFR 172.704(a)(2)(i).
Function-specific Training. (i) Each hazmat employee must be provided function-specific training concerning the requirements of this subchapter, or exemptions or special permits issued under subchapter A of this chapter, that are specifically applicable to the functions the employee performs.
Upon completion of this course, the student will be able to:
A complete DOT Hazardous Materials training curriculum must include:
Each Hazmat Employer must train, test and certify each Hazmat Employee within 90 days of employment. Recurrent training is required at least once every 3 years.
Initial training is required within 90 days for new employees or employees who assume new hazmat related responsibilities. Until they are trained, these employees may perform a hazardous materials employee function only under direct supervision.
DOT requires that hazmat employees be retrained and tested at least once every three years. However, the FAA, under 14 CFR, requires training for air carrier employees every two years.
Both the DOT and FAA require employers to maintain training records.
Depending on your specific occupation your employer may also require you to take OSHA, EPA, or other hazardous materials response training.
In addition to the training provided by an outside party, a student should receive site-specific training provided by his or her employer. This training should target the company's unique approach to hazard prevention, including the use of site-specific equipment, health and safety policies, and emergency procedures. As a rule, this company-specific training should be well documented.
If you are required to use any equipment for safety or other purposes as part of your job, additional training may be required.
The bottom line in ALL SITUATIONS is that employers are required to ensure their employees are trained adequately to do their job.
To learn more about our volume discounts for this training, visit our Volume Pricing page. We also offer an easy way to Enroll Multiple Students.
We're Celebrating 20 Years With 20% Off our most popular online training. No coupon code necessary!
With so many people using mobile devices (e.g. tablets and smart phones) to check emails, do business, connect to social media, and even enjoy movies, Safety Unlimited, Inc. knows it's time to make some changes.
We're excited to announce that all courses are now available in HTML 5, making them compatible with the browser on your mobile device. Our mobile-ready courses require only the most recent version of your mobile device's web browser, allowing students to take the course anywhere they have an internet connection.
Our Learning Management System tracks your progress, allowing you to switch between your computer and mobile device without retaking any training content. You can stop training in the middle of a section on one device and pick it up at the same spot on another. There is no need to complete an entire section in order to move from one device to another.
.Having ALL of our online courses MOBILE DEVICE READY gives you, the customer, the choice and flexibility to take our online training on your desktop, laptop, or handheld device, wherever you may be. You now have complete control of when and where you would like to take your online training!
Mobile versions of training are new, but we’ve identified some Pros and Cons during our extensive testing and listed them below.
Pros
Cons
During our testing we noticed tablets are much better for training than smartphones, due to their larger screen size. … The best way to see how well the training works on your device is to click on the DEMO button on this page.
Test the functionality of your browser using HTML5 and compare it to the performance of other browsers. If you find other browsers are more compatible than your own, you may want to make the switch.
A person whose employee(s) perform the following functions:
The term "hazmat employer" also includes any department, agency, or instrumentality of the United States, a State, a political subdivision of a State, or an Indian tribe engaged in offering or transporting hazmat in commerce.
A person who is employed by a hazardous materials employer and directly affects hazardous materials (hazmat) transportation safety.
An owner-operator of a motor vehicle which transports hazmat, and a person (including a self-employed person) who:
Function-specific training is hazardous materials training required as part of your job, but is not covered by any of the other core DOT courses (e.g., General Awareness, Security Awareness, Safety Awareness, etc.). Our current function-specific course options include the following:
* Additional function-specific training may be required to prepare you for the duties associated with your job.
Modal-specific training is hazardous materials transportation training that is specific to the mode of transportation by which a hazmat is conveyed. There are four DOT modal-specific courses, one for each mode of transportation:
In-depth Security training is required when an employer is required by 49 CFR 172.800(b) to have an In-depth Security plan. This training is site specific and covers actions taken by employees according to the employer's plan. In-depth security training is not currently offered.
Drivers of motor vehicles that transport hazardous materials must have training that involves how to safely transport a hazardous material by highway. This may involve a wide variety of driver safety courses. Driver training is not currently offered.
