OSHA 30 Hour: Construction Industry Outreach Training - Online (Spanish)

OSHA Outreach (10 Hour and 30 Hour) Online

$169.00 / 11% Off

This OSHA 30 Hour: Construction Industry Outreach Training - Online (Spanish) course is designed to equip you with essential knowledge about worker rights, employer responsibilities, and effective methods to identify, abate, avoid, and prevent job-related hazards. While covering many critical safety topics, we understand the significance of site-specific information and hands-on skill demonstrations to ensure your safety and meet the training requirements established by OSHA standards.

Features:

Certificate of Completion

Mobile Device Ready

ENROLL NOW

Overview

The training provides greater depth on an expanded list of topics associated with workplace hazards for construction safety and health hazards which a worker may encounter at a construction site, as opposed to the 10 Hour OSHA Construction Outreach course that is for workers without supervisory responsibility.

While voluntary at the U.S. federal level, it holds significant importance within various sectors. Upon successfully finishing the program, each student will be awarded a completion card sanctioned by the U.S. Department of Labor, serving as a testament to their accomplishment. It's essential to note that OSHA Outreach Training is exclusively accessible to trainees within the geographic jurisdiction governed by the Occupational Safety and Health (OSH) Act.

Trainees outside this jurisdiction will not receive cards. This 30-Hour program is intended for workers with some safety responsibility, and the 10-Hour program is primarily intended for entry-level workers. The program will take longer than 30 hours.

Benefits

Upon successful completion of the UL Solutions OSHA 10-Hour General Industry Training, students will achieve the following benefits:

Cultivate a Safety-Oriented Mindset: Students will develop a safety-focused mindset and acquire valuable skills essential for their future in the construction industry;
Empowered with Knowledge: Participants will gain in-depth insights into their worker rights, employer responsibilities, and how to address complaints, empowering them to navigate workplace challenges confidently;
OSHA Training Institute (OTI) Wallet Card: Upon completion, students will receive a prestigious wallet card from the OSHA Training Institute (OTI). This card serves as a tangible endorsement to employers, verifying that they have received the necessary safety training required in the workplace; and
Enhanced Employability: Graduates will experience heightened employability, granting them a competitive advantage in the job market. The acquired knowledge and certification will make them stand out to potential employers, increasing their chances of securing rewarding opportunities in the construction industry.

Department of Labor (DOL) Cards

We advise trainees to expect to receive their OSHA card in the mail in 6-8 weeks after course completion. If we are notified within 90 days of course completion that a card wasn't received, a replacement card can be requested (at no additional charge). Any card that is requested 90 days or more after course completion becomes a replacement card request, and there is a $40 fee associated. Support will verify we have a completion record for the trainee and confirm they are eligible to receive the replacement. If so, they must complete a replacement card form. All reissued and replacement cards are shipped vs. mailed, and a (Fedex) tracking link will be provided.

Biometrics for Proctored Courses

Upon taking this Actively Proctored OSHA 10- or 30-Hour suite, you will be required to activate the Voice Authentication System. Refer to the following steps when activating your voice security:

A box like the example provided will appear on-screen and will ask you to call the number shown. The number is (888) 676-4656.
Once you dial the number, you will be asked to enter the 4-digit PIN you see on-screen. The PIN in the sample image is an example and you will receive a different PIN each time.
Upon your first time calling, you must follow the instructions given by repeating a series of 6-digit codes. Once these numbers are captured from your voice, you will receive a confirmation and may hang up. Your voice authentication is now ready. Click the 'Continue' button on your computer You may now proceed to the first course, 'OSHA Outreach Training Orientation'.

OSHA Policies

OSHA's policy limits all OSHA Outreach Training (classroom and online) to a maximum of 7.5 hours of training per day in all OSHA 10 and 30 Hour courses. As a result, all 30 Hour courses must be delivered over a minimum of four days.

OSHA has also issued a new policy of Program Jurisdiction Restrictions. Outreach Training Programs are now limited to OSHA jurisdiction only. Student course completion cards can only be issued to students within U.S. jurisdiction (the 50 States and certain U.S. Territories).

12 Months To Start

Students have 12 months to start a class once registered; otherwise, the registration will expire. NO EXCEPTIONS

180 Days To Complete

Students have 180 days to complete the training from the time they enroll in the course. When a course EXPIRES, the student will no longer have access to the course and any course progress will be lost. There can be no extensions for the OSHA Outreach titles. NO EXCEPTIONS

Free Reset Eligibility

If a student fails an OSHA 10 or 30 hour online quiz or the final exam, we allow a single free reset for all learners.

Eligibility for a free reset is granted if the student fails either a quiz or the final exam, but not both. The course is locked when a student fails a section and will not allow them to continue with the course. If the student fails any section and has not used their one free reset, please contact our customer service team and we will reset the course.

If a student is unable to complete their course due to either the OSHA 6-month regulation or the 1-year access period, no-reset or additional free access will be granted.

Reset Consequences

If a free reset is issued, the student's entire progress historically will be lost. The student will be required to restart the course from the very beginning.

Refund Policy

Refunds must be sent in writing to moc.detimilnuytefas@nullofni within thirty (30) business days of purchase if no more than 25% of the course has been completed.

Print Syllabus

Course Format

Following the completion of all training content and achievement of passing scores on all exams, students will need to complete a brief evaluation and confirm his/her identity. After doing so, the student will have access to the course completion certificate.

Required Topics

Introduction to OSHA
Managing Safety and Health
OSHA Focus Four Hazards
- Fall Hazards
- Avoiding Electrocution Hazards
- Struck-By Hazards
- Caught-In or Between Hazards
Personal Protective and Lifesaving Equipment
Health Hazards in Construction
Stairways and Ladders

Elective and Optional Topics

Concrete and Masonry Construction
Confined Space Entry
Cranes, Derricks, Hoists, Elevators and Conveyors
Fire Protection and Prevention
Materials Handling, Storage, Use and Disposal
Motor Vehicles, Mechanized Equipment and Marine Operations; Rollover Protective Structures and Overhead Protection; and Signs, Signals and Barricades
Safety and Health Programs
Tools – Hand and Power
Welding and Cutting

Completion Requirements

Students must satisfy all OSHA requirements prior to receiving the OSHA 30-Hour Construction Industry wallet card:

Must pass all assessments with a grade of at least 70% or higher.
Must complete the course within six (6) months from the course enrollment date.
Must spend no more than 7.5 hours (450 Minutes) in a single day. This course will take at least four days to complete.
Must view and complete all required course material, including the course survey.

Accreditation

Because this course is regulated closely by OSHA and offered through this affiliation, there are differences in how it is delivered when compared to most of the other online courses we offer. Learn more in the About section.

Frequently Asked Questions About Online Training

If you do not find your question here, we have more FAQs

How long will this course take to complete?

Our courses are set up to take a specific amount of time. Some students may get through the training more quickly, while others may take longer to complete their training. This course will take around 30 hours to complete.

Remember, this training should be used as an intricate tool in the context of an overall training program; it can be combined with other training throughout the year in order to meet any hour requirements needed.

Do I have to finish the course in one sitting

No, our courses are designed so you can start and stop as needed, allowing you to break the training up over a longer period of time. Our system will keep track of your progress, enabling you to resume where you left off upon your next login. It is important that once you start a section, you complete that section or you will need to start that section over from the beginning upon your return.

Can I take the course from more than one computer?

Yes, you can take the online portion by signing in with your username and password from any location and computer with high-speed internet access. However, each computer does need to meet our Basic System Requirements for viewing our online courses.