Many jurisdictions, employers, and unions making it a mandatory requirement. However, it remains voluntary at the U.S. federal level. Upon successful completion of the program, each student will be awarded a completion card by the U.S. Department of Labor, validating your accomplishment in mastering workplace safety.
Please note that OSHA Outreach Training is exclusively available to trainees within the geographic jurisdiction of the Occupational Safety and Health (OSH) Act, ensuring the content's relevance and applicability to your specific location.
Trainees outside this jurisdiction will not receive cards for course completion. This 10-Hour program is primarily intended for entry-level workers. The program will take longer than 10 hours.
Upon successfully finishing the UL Solutions OSHA 10-Hour Construction Industry Training, students will attain the following benefits:
- Cultivate a Safety-Oriented Mindset: Participants will develop a safety-first mindset and acquire invaluable skills that will serve them well throughout their future careers in the construction industry.
- Empowered with Knowledge: Students will gain a comprehensive understanding of their worker rights, employer responsibilities, and the process of filing a complaint, ensuring they are well-informed and can confidently navigate workplace challenges.
- OSHA Training Institute (OTI) Wallet Card: Graduates will be awarded a prestigious wallet card from the OSHA Training Institute (OTI). This card serves as tangible evidence for employers that they have received essential safety training required for construction workplaces, enhancing their credibility and employability.
- Enhanced Employability: Completion of this training will elevate students' employability, granting them a competitive edge in the job market. The acquired knowledge and certification will make them stand out to potential employers, increasing their chances of securing rewarding opportunities in the construction industry.
Department of Labor (DOL) Cards
We advise trainees to expect to receive their OSHA card in the mail in 6-8 weeks after course completion. If we are notified within 90 days of course completion that a card wasn't received, a replacement card can be requested (at no additional charge). Any card that is requested 90 days or more after course completion becomes a replacement card request, and there is a $40 fee associated. Support will verify we have a completion record for the trainee and confirm they are eligible to receive the replacement. If so, they must complete a replacement card form. All reissued and replacement cards are shipped vs. mailed, and a (Fedex) tracking link will be provided.
Biometrics for Proctored Courses
Upon taking this Actively Proctored OSHA 10- or 30-Hour suite, you will be required to activate the Voice Authentication System. Refer to the following steps when activating your voice security:
- A box like the example provided will appear on-screen and will ask you to call the number shown. The number is (888) 676-4656.
- Once you dial the number, you will be asked to enter the 4-digit PIN you see on-screen. The PIN in the sample image is an example and you will receive a different PIN each time.
- Upon your first time calling, you must follow the instructions given by repeating a series of 6-digit codes. Once these numbers are captured from your voice, you will receive a confirmation and may hang up. Your voice authentication is now ready. Click the 'Continue' button on your computer You may now proceed to the first course, 'OSHA Outreach Training Orientation'.
OSHA's policy limits all OSHA Outreach Training (classroom and online) to a maximum of 7.5 hours of training per day in all OSHA 10 and 30 Hour courses. As a result, all 10 Hour courses must be delivered over a minimum of two days.
OSHA has also issued a new policy of Program Jurisdiction Restrictions. Outreach Training Programs are now limited to OSHA jurisdiction only. Student course completion cards can only be issued to students within U.S. jurisdiction (the 50 States and certain U.S. Territories).
12 Months To Start
Students have 12 months to start a class once registered; otherwise, the registration will expire. NO EXCEPTIONS
180 Days To Complete
Students have 180 days to complete the training from the time they enroll in the course. When a course EXPIRES, the student will no longer have access to the course and any course progress will be lost. There can be no extensions for the OSHA Outreach titles. NO EXCEPTIONS
Free Reset Eligibility
If a student fails an OSHA 10 or 30 hour online quiz or the final exam, we allow a single free reset for all learners.
Eligibility for a free reset is granted if the student fails either a quiz or the final exam, but not both. The course is locked when a student fails a section and will not allow them to continue with the course. If the student fails any section and has not used their one free reset, please contact our customer service team and we will reset the course.
If a student is unable to complete their course due to either the OSHA 6-month regulation or the 1-year access period, no-reset or additional free access will be granted.
If a free reset is issued, the student's entire progress historically will be lost. The student will be required to restart the course from the very beginning.
Refunds must be sent in writing to moc.detimilnuytefas@nullofni within thirty (30) business days of purchase if no more than 25% of the course has been completed.
Following the completion of all training content and achievement of passing scores on all exams, students will need to complete a brief evaluation and confirm his/her identity. After doing so, the student will have access to the course completion certificate.
- Introduction to OSHA
- OSHA Focus Four Hazards
- Fall Hazards
- Avoiding Electrocution Hazards
- Struck-By Hazards
- Caught-In or Between Hazards
- Personal Protective and Lifesaving Equipment
- Personal Protective Equipment
- Health Hazards in Construction
Elective and Optional Topics
- Cranes, Derricks, Hoists, Elevators and Conveyors
- Materials Handling, Storage, Use and Disposal
- Stairways and Ladders
- Tools – Hand and Power
Students must satisfy all OSHA requirements prior to receiving the OSHA 10-Hour Construction Industry wallet card:
- Must pass all assessments with a grade of at least 70% or higher.
- Must complete the course within six (6) months from the course enrollment date.
- Must spend no more than 7.5 hours (450 Minutes) in a single day. This course will take at least two days to complete.
- Must view and complete all required course material, including the course survey.
Because this course is regulated closely by OSHA and offered through this affiliation, there are differences in how it is delivered when compared to most of the other online courses we offer. Learn more in the About section.
Frequently Asked Questions About Online Training
If you do not find your question here, we have more FAQs
Our courses are set up to take a specific amount of time. Some students may get through the training more quickly, while others may take longer to complete their training.
This course will take around 10 hours to complete.
Remember, this training should be used as an intricate tool in the context of an overall training program; it can be combined with other training throughout the year in order to meet any hour requirements needed.
No, our courses are designed so you can start and stop as needed, allowing you to break the training up over a longer period of time. Our system will keep track of your progress, enabling you to resume where you left off upon your next login. It is important that once you start a section, you complete that section or you will need to start that section over from the beginning upon your return.
Yes, you can take the online portion by signing in with your username and password from any location and computer with high-speed internet access. However, each computer does need to meet our Basic System Requirements
for viewing our online courses.