OSHA 8 Hour HAZWOPER Refresher for NC Well Contractors

$39.95 ITEMS #0242-1321, #0242-1320, #0242-1319

OSHA 8 Hour HAZWOPER Refresher for NC Well Contractors course is intended for workers who need to refresh an existing 24 or 40-hour HAZWOPER certification.

This program is authorized for:

0.8 Contact Hour (0.8 CEUs) of REHS Continuing Education (CE)

0.8 Contact Hour (0.8 CEUs) of IACET Continuing Education (CE)

Certificate of Completion

Mobile Device Ready

DEMO ENROLL NOW

Who Should Take This Course?

We offer several versions of the 8 Hour OSHA HAZWOPER Refresher to meet your training needs. Find out what is covered in each version.

Supervisor Refresher

If you have OSHA HAZWOPER Supervisor certification, you can take our OSHA 8 Hour HAZWOPER Supervisor Refresher course. The OSHA HAZWOPER Supervisor Refresher will refresh OSHA HAZWOPER 24-, 40-, and Supervisor (Initial) certification.

Package Deals

For workers who supervise other HAZWOPER workers, this course can also be taken with our OSHA 8 Hour HAZWOPER Supervisor (Initial) course as part of a package deal. Additional information is available in the Discounts tab.

Accreditations

This OSHA accepted training is brought to you by a team of OSHA Certified Outreach Trainers and meets the requirements for 29 CFR 1910.120(e)(8), or CFR 1910.120(p)(7)(i) for General Industry, and 29 CFR 1926.65(e)(8), or 29 CFR 1926.65(p)(7)(i) for Construction. This course is not intended to meet the Federal OSHA HAZWOPER training requirements of 29 CFR 1910.120(q)(8) for General Industry, or 29 CFR 1926.65(q)(8) for Construction. See the Objectives Tab for more information on meeting the refresher requirements for those section.

REHS Continuing Education Credits

Per the California Department of Public Health, Safety Unlimited, Inc. is authorized to offer 8 Contact Hours (0.8 CEUs) of Continuing Education (CE) for this program.

While these CE units are intended for Registered Environmental Health Specialists (REHS) in California, they are often transferred to other accrediting bodies. Please check with your specific agency for more details and to learn if your agency accepts this course for CE credit (Public Health Accreditation #044).

IACET Continuing Education Credits

Safety Unlimited, Inc. is authorized by IACET to offer 8 Contact Hours (0.8 CEUs) of Continuing Education (CE) for this program.

Safety Unlimited, Inc. (Provider #5660170-2) is accredited by the International Association for Continuing Education and Training (IACET). Safety Unlimited, Inc. complies with the ANSI/IACET Standard, which is recognized internationally as a standard of excellence in instructional practices. As a result of this accreditation, Safety Unlimited, Inc. is accredited to issue the IACET CEU. As an IACET Accredited Provider, Safety Unlimited, Inc. offers CEUs for its programs that qualify under the ANSI/IACET Standard.

Print Syllabus

About This Course

Following the completion of all training content and achievement of passing scores on all exams, students will need to complete a brief evaluation and confirm his/her identity. After doing so, the student will have access to the course completion certificate.

This fully narrated course is built for success, and includes interactions, exercises, and quiz questions intended to help prepare students for the module exams. Students must answer each quiz question and complete each interaction in order to proceed.

Course Exams

Module exams are conducted after the completion of each module. Students are required to complete each exam after completing all the sections within the corresponding module. This allows students to take the corresponding exam while the information is still fresh. THERE IS NO FINAL EXAM.

Each exam consists of 10 questions randomly selected from a large pool of questions. A score of 70% or better is required to pass each exam. Students who do not pass the exam the first time may retake the exam as many times as necessary in order to pass.

Course Objectives

The objectives for this course are to meet the Federal OSHA HAZWOPER training requirements of 29 CFR 1910.120(e)(8), or CFR 1910.120(p)(7)(i) for General Industry, and 29 CFR 1926.65(e)(8), or 29 CFR 1926.65(p)(7)(i) for Construction. This course is also intended to meet any HAZWOPER training requirements for EPA and similar State OSHA regulations.

This course is not intended to meet the Federal OSHA HAZWOPER training requirements of 29 CFR 1910.120(q)(8) for General Industry, or 29 CFR 1926.65(q)(8) for Construction. See below for more information on meeting the refresher requirements for those section.

Per 29 CFR 1910.120(e)(8) and 29 CFR 1926.65(e)(8)

Employees specified in paragraph (e)(1) of this section, and managers and supervisors specified in paragraph (e)(4) of this section, shall receive eight hours of refresher training annually on the items specified in paragraph (e)(2) and/or (e)(4) of this section, any critique of incidents that have occurred in the past year that can serve as training examples of related work, and other relevant topics.

Per 29 CFR 1910.120(p)(7)(i) and 29 CFR 1926.65(p)(7)(i)

The employer shall develop and implement a training program which is part of the employer's safety and health program, for employees exposed to health hazards or hazardous substances at TSD operations to enable the employees to perform their assigned duties and functions in a safe and healthful manner so as not to endanger themselves or other employees. The initial training shall be for 24 hours and refresher training shall be for eight hours annually. Employees who have received the initial training required by this paragraph shall be given a written certificate attesting that they have successfully completed the necessary training.

Other HAZWOPER Refresher Training Courses

Per 29 CFR 1910.120(q)(8) and 29 CFR 1926.65(q)(8)

Those employees who are trained in accordance with paragraph (q)(6) of this section shall receive annual refresher training of sufficient content and duration to maintain their competencies, or shall demonstrate competency in those areas at least yearly.

Again, this training courses is not intended to meet the Federal OSHA HAZWOPER training requirements of 29 CFR 1910.120(q)(8) for General Industry, or 29 CFR 1926.65(q)(8) for Construction.

For OSHA HAZWOPER section (q) refresher training, we offer these refresher courses:

Learning Objectives

At the end of this course, students should be able to:

Re-familiarize themselves with the safety and health procedures used at the workplace;
Understand the hazards they may confront at the jobsite;
Identify the controls or PPE necessary to protect themselves from these hazards; and
Perform assigned duties and functions in a safe and healthful manner.

Training

All HAZWOPER workers are required to refresh their initial HAZWOPER training on an annual basis. This includes HAZWOPER 24-, 40-, and Supervisor (Initial) training.

This course is designed to help workers meet the OSHA 8 Hour HAZWOPER Refresher training requirement for 29 CFR 1910.120(e)(8), or 29 CFR 1910.120(p)(7)(i) for General Industry and 29 CFR 1926.65(e)(8), or 29 CFR 1926.65(p)(7)(i) for Construction. This course is not intended to meet the Federal OSHA HAZWOPER training requirements of 29 CFR 1910.120(q)(8) for General Industry, or 29 CFR 1926.65(q)(8) for Construction. See the Objectives Tab for more information on meeting the refresher requirements for those section.

Additional Training

Workers must receive additional training, when required by Federal, State, or local regulations, on the specific hazards of their job. Additional training in the use of any personal protective equipment or clothing used as part of emergency response is required and should be provided by your employer.

Training Providers should be used to ensure credibility and augment a company's training program. Therefore, in addition to the training provided by an outside party, a student should receive site-specific training supplied by his or her employer. This training should target the company's unique approach to hazard prevention, including the use of site-specific equipment, health and safety policies, and emergency procedures. As a rule, this company-specific training should be well documented.

If this training takes less than 8 hours to complete, it should be combined with other training conducted throughout the year to meet the 8-hour requirement. This additional training can come from hands-on training, training that is job- or company-specific, or even tailgate safety meetings.

Volume Pricing

To learn more about our volume discounts for this training, visit our Volume Pricing page. We also offer an easy way to Enroll Multiple Students.

Package Deals for Additional Savings

The package deals below combine three of our online courses with the OSHA 8 Hour HAZWOPER Supervisor (Initial) course.

Courses Available for Package Pricing with 8 Hour HAZWOPER Supervisor		Combined Regular Prices	Special Package Price	Total Savings	Enroll
Online OSHA 40 Hour HAZWOPER $210.00	Online OSHA 8 Hour Supervisor $53.57	$263.57	$250.00	- $13.57	Save Now
Online OSHA 24 Hour HAZWOPER $150.00	Online OSHA 8 Hour Supervisor $53.57	$203.57	$175.00	- $28.57	Save Now
Online OSHA 8 Hour Refresher (with ID) $44.95	Online OSHA 8 Hour Supervisor $53.57	$98.52	$75.00	- $23.52	Save Now

Save 20% On Select Courses

We're Celebrating 20 Years With 20% Off our most popular online training. No coupon code necessary!