OSHA 16 Hour HAZWOPER Upgrade (to the 40 Hour) - Blended (8 Hours Online/8 Hours Classroom)

OSHA HAZWOPER per 29 CFR 1910.120 & 29 CFR 1926.65

Only: $195.00

ENROLL
Wallet ID Included

Overview

This OSHA 16 Hour HAZWOPER Upgrade (to the 40 Hour) - Blended (8 Hours Online/8 Hours Classroom) course is for those workers who have the 24 Hour HAZWOPER training and wish to upgrade to the 40 Hour HAZWOPER level.

Per 29 CFR 1910.120(e)(3)(iv) and 29 CFR 1926.65(e)(3)(iv)

Workers with 24 hours of training who are covered by paragraphs (e)(3)(ii) and (e)(3)(iii) of this section, and who become general site workers or who are required to wear respirators, shall have the additional 16 hours and two days of training necessary to total the training specified in paragraph (e)(3)(i).

This version of the course provides 8 hours of online training coupled with 8 hours of classroom training. We also offer a 16 Hour HAZWOPER Online course that provides training that is entirely online for workers who will receive follow-up training with company-specific equipment or workers who are unlikely to use HAZWOPER equipment on any worksite.

All HAZWOPER training must be refreshed each year.

If students have taken the 24 Hour HAZWOPER from another training provider, appropriate documentation must be provided before a 40 Hour HAZWOPER certificate is issued.

Classroom Training

The classroom portion of this training provides hands-on training for the final 8 hours of the 16-hour upgrade. OSHA requires workers to be adequately trained to use personal protective equipment in a training environment prior to using it in a hazardous work environment. The hands-on classroom session introduces students to examples of specialized equipment and allows them to practice donning, doffing, and using it.

View Current Classroom LOCATIONS & SCHEDULE

Advantages of Safety Unlimited Online Training

Course Objectives

The objectives for this course are to meet the Federal OSHA HAZWOPER training requirements of 29 CFR 1910.120(e)(3)(i) for General Industry and 29 CFR 1926.65(e)(3)(i) for Construction. This course is also intended to meet any HAZWOPER training requirements for EPA and State OSHA regulations.

Per 29 CFR 1910.120(e)(3)(iv) and 29 CFR 1926.65(e)(3)(iv)

Workers with 24 hours of training who are covered by paragraphs (e)(3)(ii) and (e)(3)(iii) of this section, and who become general site workers or who are required to wear respirators, shall have the additional 16 hours and two days of training necessary to total the training specified in paragraph (e)(3)(i).

Learning Objectives

At the end of this course, students should be able to:

  • Describe different types of respiratory protection for HAZWOPER workers;
  • Describe different types of monitors used to detect hazardous gases;
  • Explain methods for proper care of personal protective equipment;
  • Explain the need for fit testing; and
  • Explain donning/doffing procedures for personal protective equipment.

Course Outline

For an easy path to completion and certification, the online portion of this course consists of 8 hours of fully narrated material built in a linear fashion, allowing you to navigate straight through the course without switching pages, searching for the right link or tab to continue. Interactions, exercises, and knowledge checks are also provided to aid the learning experience. Students must answer each knowledge check and complete each interaction in order to proceed. Knowledge checks and interactions are intended to help prepare students for the module exams.

Course Exams

This course has 4 module exams based upon the 4 modules in the online portion. Students are required to complete each exam after completing all the sections within the corresponding module. This allows students to take the corresponding exam while the information is still fresh. THERE IS NO FINAL EXAM.

Each exam consists of 10 questions randomly selected from a large pool of questions. A score of 70% or better is required to pass each exam. Students who do not pass the exam the first time may retake the exam as many times as necessary in order to pass.

Accreditation

This OSHA accepted training is brought to you by a team of OSHA Certified Outreach Trainers and meets the requirements for 29 CFR 1910.120(e)(3)(iv) and 29 CFR 1929.65(e)(3)(iv). Upon completion of this course you will have immediate access to a Safety Unlimited course completion certificate you can download, save, and/or print.

Continuing Education Credits

Per the California Department of Public Health, this course is approved for 16 Contact Hours (1.6 CEUs) of Continuing Education (CE). While these CE units are intended for Registered Environmental Health Specialists (REHS) in California, they are often transferred to other accrediting bodies. Please check with your specific agency for more details and to learn if your agency accepts this course for CE credit (Public Health Accreditation #044).

Training Requirements

When required by OSHA standards, workers must receive additional training on the specific hazards of their job. Training providers should be used to ensure credibility and augment a company's training program.

Additional Training

In addition to the training provided by an outside party, a student should receive site-specific training provided by his or her employer. This training should target the company's unique approach to hazard prevention, including the use of site-specific equipment, health and safety policies, and emergency procedures. As a rule, this company specific training should be well documented.

If a worker who has taken the OSHA 40 Hour HAZWOPER course entirely online is required to use any of the equipment discussed during their training, more training may be warranted.

The bottom line in ALL SITUATIONS is that employers are required to ensure their employees are trained adequately to do their job.

Save 20% On Select Courses

We're Celebrating 20 Years With 20% Off our most popular online training. No coupon code necessary!

Safety Unlimited Inc. 20th Anniversary

Frequently Asked Questions About This Course

If you do not find your question here, we do have more FAQs

The 16 Hour HAZWOPER Upgrade Course can be taken entirely online, but keep in mind that students will need to be trained on how to use any protective equipment that they need as part of their job prior to using that equipment on any worksite. This is the case whether the student takes the course online or takes the course in a classroom setting.

The three-day requirement of direct supervision has nothing to do with the training requirement. This requirement is meant to ensure that newly trained employees are not sent to a work site and left unsupervised but get supervised field experience for at least three days. It is not part of their training period; it is part of their job function period.

Our courses are set up to take a specific amount of time. Some students may get through the training more quickly, while others may take longer to complete their training. This course will take around 16 hours to complete.

Remember, this training should be used as an intricate tool in the context of an overall training program; it can be combined with other training throughout the year in order to meet any hour requirements needed.

No, our courses are designed so you can start and stop as needed, allowing you to break the training up over a longer period of time. Our system will keep track of your progress, enabling you to resume where you left off upon your next login. It is important that once you start a section, you complete that section or you will need to start that section over from the beginning upon your return.

Yes, you can take the online portion by signing in with your username and password from any location and computer with high-speed internet access. However, each computer does need to meet our basic system requirements for viewing our online courses.

Yes, once you have completed the course you will be able to download, save, or print a certificate of completion from your student account. Certificates are created in a pdf format. Users must have the latest version of Adobe Acrobat Reader before attempting to download the completion certificate.

View Sample Certificate

Yes, in addition to the pdf certificate, this course also comes with a PVC wallet ID card with optional photo. ID cards are mailed from our Main Office in Southern California via U.S. Postal Service to anywhere in the United States. Addresses outside the U.S. may incur additional postage fees. Wallet ID cards are created and mailed either the same or next business day, depending on what time the course is completed. Please allow for appropriate mail time, as this may vary by location.

View Sample Wallet ID